Tenacity Herbicide - Selective Broadleaf Weed & Grass Control

Tenacity Herbicide is labeled for use on St. Augustinegrass only for sod production, not for general weed control on established residential lawns.For established St. Augustinegrass, Celsius WG Herbicide is an alternative labeled for use on this turf type. The best choice depends on which weeds you need to control.Always read and follow the product label for application directions and safety precautions.Product Label: Tenacity Herbicide

Tenacity Herbicide is labeled for use on St. Augustinegrass only for sod production, not for general weed control on established residential St. Augustine lawns.For an established St. Augustine lawn in Jacksonville, Florida, Celsius WG Herbicide is an alternative labeled for use on St. Augustinegrass and controls a broad range of weeds. The best choice depends on the specific weed you need to control.Please read the entire product label before use and follow all mixing instructions, application directions, and safety precautions.

Yes. Tenacity Herbicide is labeled to control ground ivy, commonly known as Creeping Charlie. For post-emergent control of existing Creeping Charlie, the label recommends using a non-ionic surfactant to improve control.HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

Tenacity Herbicide is not labeled for use on zoysiagrass, including Zeon Zoysia, so we would not recommend applying it to Zeon Zoysia sod due to the potential for turf injury. The label's new-lawn instructions only apply to tolerant turfgrass species specifically listed on the label.For newly installed Zeon Zoysia sod, we recommend allowing the sod to become established and selecting a herbicide specifically labeled for use on zoysiagrass and for the target weed.HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

This one?   https://homeandgardensupply.com/products/tenacity-with-dye-and-surfactant

Tenacity Herbicide is not mixed at one fixed rate per gallon. The label rate is 4–8 fl. oz. per acre, applied in at least 30 gallons of water per acre. Therefore, an 8 oz bottle treats approximately 1–2 acres, depending on the application rate. The amount of water used should be based on your sprayer calibration and labeled application directions. HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

Yes. Tenacity Herbicide is labeled to control Ground Ivy (Creeping Charlie), along with many other difficult broadleaf and grassy weeds, including clover, wild violet, dandelion, oxalis, nimblewill, and yellow nutsedge. Effectiveness on other “woodsy” weeds will depend on the specific weed being treated and whether it is listed on the label. HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

Yes. Tenacity Herbicide can be used on lawns where pets are present when applied according to the product label. Keep pets out of the treated area during application and until the spray has completely dried. HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

Yes. Tenacity Herbicide can be used on lawns where pets are present when applied according to the product label. Keep pets out of the treated area during application and until the spray has completely dried. HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

For a broadcast application, Tenacity Herbicide is labeled at 4–8 fl. oz. per acre in at least 30 gallons of water per acre. Dandelion, clover, and ground ivy are listed target weeds. For post-emergent applications, the label also directs use of a nonionic surfactant, and a repeat application after 2–3 weeks may be needed for adequate control. HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

Tenacity Herbicide should be applied in at least 30 gallons of water per acre for broadcast applications, according to the product label. The amount of Tenacity used will depend on the labeled application rate for the target weed and turfgrass species. HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

Tenacity Herbicide can be applied to labeled turfgrass around established trees. The product label states to avoid applications over the top of exposed roots of trees and ornamentals and to avoid spraying desirable plants, as Tenacity may injure sensitive vegetation. HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

Tenacity Herbicide can be applied to labeled turfgrass around established trees. The product label states to avoid applications over the top of exposed roots of trees and ornamentals and to avoid spraying desirable plants, as Tenacity may injure sensitive vegetation. HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

Tenacity Herbicide Broadleaf Weed & Grass Control does not have a single mixing rate, as the amount of product needed depends on the target weed, turfgrass species, and application type (pre-emergent, post-emergent, or spot treatment). For spot applications with a hand-held or backpack sprayer, the label recommends 1 teaspoon of Tenacity per 2 gallons of water, along with 3 teaspoons of a non-ionic surfactant when making post-emergent applications. HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

Tenacity Herbicide Broadleaf Weed & Grass Control does not have a single mixing rate, as the amount of product needed depends on the target weed, turfgrass species, and application type (pre-emergent, post-emergent, or spot treatment). For spot applications with a hand-held or backpack sprayer, the label recommends 1 teaspoon of Tenacity per 2 gallons of water, along with 3 teaspoons of a non-ionic surfactant when making post-emergent applications. HomeandGardenSupply.com always recommends reading the entire product label before use and following all label directions, safety precautions, mixing instructions, and proper application methods.

No, Tenacity Herbicide is not labeled to control quackgrass. While it may cause temporary whitening or suppression, it is not considered an effective treatment for established quackgrass.If the quackgrass is growing in landscape beds, fence lines, driveways, or other areas where you do not want any vegetation, Home & Garden Supply carries Roundup ProMax Herbicide, which is labeled for quackgrass control. Because quackgrass spreads by underground rhizomes, repeat applications may be necessary for complete control.If the quackgrass is growing in a desirable lawn, there is no selective herbicide that will reliably kill quackgrass without also injuring or killing the turf. In those situations, carefully spot-treating with a glyphosate product such as Roundup ProMax is the most effective option. Read and follow the product label before use.

Tenacity Herbicide is labeled to control yellow nutsedge, but bermudagrass is sensitive to Tenacity. Since your lawn is actively growing in the middle of July, applying Tenacity may cause temporary whitening or injury to the bermudagrass. The label recommends avoiding applications to bermudagrass unless this injury can be tolerated. For actively growing bermudagrass, a nutsedge-specific herbicide is generally the better choice. Home & Garden Supply carries products such as SedgeHammer that are labeled for yellow nutsedge control and are designed for use on established bermudagrass. Read and follow the product label before use.

Tenacity Herbicide can be used for Poa annua (annual bluegrass) control, but hybrid bermudagrass is sensitive to Tenacity. If your lawn is actively growing hybrid Bermuda, applications may cause temporary whitening or injury. If you decide to use Tenacity, follow the label directions carefully for bermudagrass and apply only if temporary turf discoloration can be tolerated. For established hybrid Bermuda lawns with severe Poa infestations, herbicides specifically labeled for use on bermudagrass are often a better choice.For Poa annua control in bermudagrass, Home & Garden Supply offers Celsius WG Postemergence Herbicide, which is labeled for use on established bermudagrass and provides excellent control of many broadleaf and grassy weeds while being safe for warm-season turf when used as directed. Read and follow the product label before use.

Tenacity Herbicide is labeled for both pre-emergent and post-emergent control of crabgrass. It can prevent crabgrass from emerging and control young crabgrass plants up to the 4-tiller growth stage.Always read and follow the product label (link in name) before use. 

Tenacity Herbicide is labeled for the control of crabgrass (large, smooth, and southern).  For instructions on prescription rate specific t your use case, please review the product label thuroughly.