Skip to content
Are you a PMP or a business owner looking for wholesale pricing? Click here to go to the B2B version of the website.
Are you a PMP or a business owner looking for wholesale pricing? Click here to go to the B2B version of the website.

Bora-Care with Mold-Care Spray Termiticide, Insecticide & Fungicide

$128.99
Original price $0.00 - Original price $0.00
Original price
$128.99
Current price $128.99
Size: 128 fl oz jug
Description

 

Bora-Care with Mold-Care Mold Remover Concentrate is a co-pack of products that uses Mold-Care to kill existing mold and Bora-Care to inhibit future mold, wood decay, and fungi growth.



Used in new construction to provide whole house structural wood protection from dry wood termites, mold and wood decay. Also used after flooding to kill mold and help prevent mold growth while a structure is being dried out.

 

Bora-Care with Mold-Care is a spray-on application that is applied directly to wood. Bora-Care with Mold-Care kills existing mold and helps prevent mold from growing in the future. Use Mold-Care after major flood damage or to control effects from a leaky pipe.

 

Key Features:

 

  • Kills mold and stops wood decay.
  • Pre-construction applications or post-flooding.
  • Eliminates mold that can cause serious health problems.
  • Can be applied to bare wood, plywood, particleboard, drywall and OSB
  • Bora-Care with Mold-Care is designed to penetrate wood; it doesn’t just remain on the surface but is absorbed into the interior of wood to protect it from the inside out.

 

*HomeandGardenSupply.com always recommends reading the entire product label before use, and following all necessary safety precautions, mixing instructions and proper application methods.

Additional Information
Active Ingredients:Disodium Octaborate Tetrahydrate, 40%
Product Documents:

Bora-Care with Mold-Care Label

Bora-Care with Mold-Care SDS

Target Problem:Mold, Termites, Wood destroying fungi and insects. 
Areas Of Use:Pre-Construction, Mold Protection
Application:

Bora-Care is a concentrate that must be diluted with clean water or a combination of water and permitted insecticide and/or repellent/coating, and/or antimicrobial before use. The use of warm or hot water is not required, but, if available, can aid the dilution process. A power impeller-type mixer can be used with an electric drill to shorten mixing time.

For mold control, mix 1 pint of Mold-Care Moldicide Concentrate and 1 gallon of Bora-Care in 5 gallons of water following the procedures below:

A. Manual Applications: Mix in a clean container and stir the solution until completely uniform prior to use.

B. Mechanical Systems: Add all of the dilution water to tank, start recirculator and slowly add Bora-Care concentrate. Mix until uniform.

Family & Pet Safe?Yes, if used as directed and re-entry is after product is fully dry.
Formulation:Professional
U.S. State Restrictions:None
Dimensions:128 fl oz jug: L 7.05" x W 4" x H 12"
Shipping Weight:128 fl oz jug: 12.55 lbs 
Manufacturer:Nisus Corporation
EPA Registration #64405-1

 

Bora-Care with Mold-Care Mold Remover Concentrate is a co-pack of products that uses Mold-Care to kill existing mold and Bora-Care to inhibit future mold, wood decay, and fungi growth.



Used in new construction to provide whole house structural wood protection from dry wood termites, mold and wood decay. Also used after flooding to kill mold and help prevent mold growth while a structure is being dried out.

 

Bora-Care with Mold-Care is a spray-on application that is applied directly to wood. Bora-Care with Mold-Care kills existing mold and helps prevent mold from growing in the future. Use Mold-Care after major flood damage or to control effects from a leaky pipe.

 

Key Features:

 

  • Kills mold and stops wood decay.
  • Pre-construction applications or post-flooding.
  • Eliminates mold that can cause serious health problems.
  • Can be applied to bare wood, plywood, particleboard, drywall and OSB
  • Bora-Care with Mold-Care is designed to penetrate wood; it doesn’t just remain on the surface but is absorbed into the interior of wood to protect it from the inside out.

 

*HomeandGardenSupply.com always recommends reading the entire product label before use, and following all necessary safety precautions, mixing instructions and proper application methods.

Active Ingredients:Disodium Octaborate Tetrahydrate, 40%
Product Documents:

Bora-Care with Mold-Care Label

Bora-Care with Mold-Care SDS

Target Problem:Mold, Termites, Wood destroying fungi and insects. 
Areas Of Use:Pre-Construction, Mold Protection
Application:

Bora-Care is a concentrate that must be diluted with clean water or a combination of water and permitted insecticide and/or repellent/coating, and/or antimicrobial before use. The use of warm or hot water is not required, but, if available, can aid the dilution process. A power impeller-type mixer can be used with an electric drill to shorten mixing time.

For mold control, mix 1 pint of Mold-Care Moldicide Concentrate and 1 gallon of Bora-Care in 5 gallons of water following the procedures below:

A. Manual Applications: Mix in a clean container and stir the solution until completely uniform prior to use.

B. Mechanical Systems: Add all of the dilution water to tank, start recirculator and slowly add Bora-Care concentrate. Mix until uniform.

Family & Pet Safe?Yes, if used as directed and re-entry is after product is fully dry.
Formulation:Professional
U.S. State Restrictions:None
Dimensions:128 fl oz jug: L 7.05" x W 4" x H 12"
Shipping Weight:128 fl oz jug: 12.55 lbs 
Manufacturer:Nisus Corporation
EPA Registration #64405-1

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare