Bora-Care with Mold-Care Mold Remover Concentrate is a co-pack of products that uses Mold-Care to kill existing mold and Bora-Care to inhibit future mold and wood decay fungi growth.
Used in new construction to provide whole house structural wood protection from dry wood termites, mold and wood decay. Also used after flooding to kill mold and help prevent mold growth while a structure is being dried out.
Bora-Care with Mold-Care is a spray-on application that is applied to wood by your pest control company. Bora-Care with Mold-Care kills existing mold and helps prevent mold from growing in the future. Use Mold-Care after major flood damage or to control effects from a leaky pipe.
Key Features:
*HomeandGardenSupply.com always recommends reading the entire product label before use, and following all necessary safety precautions, mixing instructions and proper application methods.
| Active Ingredients: | Disodium Octaborate Tetrahydrate, 40% |
| Product Documents: | |
| Target Problem: | Mold, Termites, Wood destroying fungi and insects. |
| Areas Of Use: | Pre-Construction, Mold Protection |
| Application: | Bora-Care is a concentrate that must be diluted with clean water or a combination of water and permitted insecticide and/or repellent/coating, and/or antimicrobial before use. The use of warm or hot water is not required, but, if available, can aid the dilution process. A power impeller-type mixer can be used with an electric drill to shorten mixing time. For mold control, mix 1 pint of Mold-Care Moldicide Concentrate and 1 gallon of Bora-Care in 5 gallons of water following the procedures below: A. Manual Applications: Mix in a clean container and stir the solution until completely uniform prior to use. B. Mechanical Systems: Add all of the dilution water to tank, start recirculator and slowly add Bora-Care concentrate. Mix until uniform. |
| Family & Pet Safe? | Yes, if used as directed and re-entry is after product is fully dry. |
| Formulation: | Professional |
| U.S. State Restrictions: | None |
| Dimensions: | L 7.05" x W 4" x H 12" |
| Shipping Weight: | 12.55 lbs |
| Manufacturer: | Nisus Corporation |
| EPA Registration # | 64405-1 |
Bora-Care with Mold-Care Mold Remover Concentrate is a co-pack of products that uses Mold-Care to kill existing mold and Bora-Care to inhibit future mold and wood decay fungi growth.
Used in new construction to provide whole house structural wood protection from dry wood termites, mold and wood decay. Also used after flooding to kill mold and help prevent mold growth while a structure is being dried out.
Bora-Care with Mold-Care is a spray-on application that is applied to wood by your pest control company. Bora-Care with Mold-Care kills existing mold and helps prevent mold from growing in the future. Use Mold-Care after major flood damage or to control effects from a leaky pipe.
Key Features:
*HomeandGardenSupply.com always recommends reading the entire product label before use, and following all necessary safety precautions, mixing instructions and proper application methods.
| Active Ingredients: | Disodium Octaborate Tetrahydrate, 40% |
| Product Documents: | |
| Target Problem: | Mold, Termites, Wood destroying fungi and insects. |
| Areas Of Use: | Pre-Construction, Mold Protection |
| Application: | Bora-Care is a concentrate that must be diluted with clean water or a combination of water and permitted insecticide and/or repellent/coating, and/or antimicrobial before use. The use of warm or hot water is not required, but, if available, can aid the dilution process. A power impeller-type mixer can be used with an electric drill to shorten mixing time. For mold control, mix 1 pint of Mold-Care Moldicide Concentrate and 1 gallon of Bora-Care in 5 gallons of water following the procedures below: A. Manual Applications: Mix in a clean container and stir the solution until completely uniform prior to use. B. Mechanical Systems: Add all of the dilution water to tank, start recirculator and slowly add Bora-Care concentrate. Mix until uniform. |
| Family & Pet Safe? | Yes, if used as directed and re-entry is after product is fully dry. |
| Formulation: | Professional |
| U.S. State Restrictions: | None |
| Dimensions: | L 7.05" x W 4" x H 12" |
| Shipping Weight: | 12.55 lbs |
| Manufacturer: | Nisus Corporation |
| EPA Registration # | 64405-1 |
Be the first to ask a question about this.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
