Insecticidal foam that can be used to treat a wide range of pests.
Specifically designed for residential structures.
Easy-to-use aerosol can...
iSTRIKE Insecticide Foam is your go-to product for Wood-Destroying Organisms (WDOs). iSTRIKE kills on contact as the foam fills galleries, voids and holes, plus it even leaves a residual to continue protection.
Specifically designed for residential structures, the easy-to-use aerosol can comes with an applicator hose and two tips: one for narrow cracks and crevices or small holes, and a wide tip for larger holes and wider area application.
Use iSTRIKE when you see wood boring beetles, carpenter bees, subterranean or drywood termites, or listed ants. iSTRIKE kills on contact as the foam expands to fill the galleries, voids and holes and leaves a residual to continue protection.
Key Features:
- Insecticidal foam that can be used to treat a wide range of pests.
- Particularly useful when treating wood destroying organisms like termites, wood boring beetles and carpenter bees.
- Can be injected directly into the galleries.
- Easy-to-use can comes with an applicator hose and two tips
- Systemic insecticide that targets the pest’s central nervous system
*HomeandGardenSupply.com always recommends reading the entire product label before use, and following all necessary safety precautions, mixing instructions and proper application methods.
| Active Ingredient: | Imidicloprid - 0.05% |
| Product Documents: | |
| Target Problem: | Wood Destroying insects; termites, wood borers and beetles, and carpenter ants. |
| Area Of Use: | This product is for application to insect galleries in damaged wood, in spaces between wooden structural members or in voids within the construction. |
| Application: | Shake well before using. Hold can upright. Point away from face. Slowly press trigger to dispense foam. To minimize run-off, continue to hold the tip firmly against injection point for 5 seconds after releasing the trigger. Spot treatments with this product can be made, as a temporary control measure, in advance of the date when final treatment of the structure with soil and foundation treatments is completed. To minimize run-off, continue to hold the application tip firmly against the injection point for a full 5 seconds after releasing the dispenser trigger; this will allow product in the application hose to fully expand and enter the target area. |
| Family & Pet Safe? | This spray should not be applied into open air areas and is designed specifically for crack, crevice and spot/void treatments. Keep this chemical away from children & pets. |
| Formulation: | Professional |
| U.S. State Restrictions: | None |
| Dimensions: | 18 oz = L 2.5" x W 2.5" x L 9" Case = L 11" x W 8.5" x 10" |
| Shipping Weights: | 18 oz = 1.5 lbs Case = 17.2 lbs |
| Manufacturer: | Nisus Corporation |
| EPA Registration # | 87093-6-64405 |
iSTRIKE Insecticide Foam is your go-to product for Wood-Destroying Organisms (WDOs). iSTRIKE kills on contact as the foam fills galleries, voids and holes, plus it even leaves a residual to continue protection.
Specifically designed for residential structures, the easy-to-use aerosol can comes with an applicator hose and two tips: one for narrow cracks and crevices or small holes, and a wide tip for larger holes and wider area application.
Use iSTRIKE when you see wood boring beetles, carpenter bees, subterranean or drywood termites, or listed ants. iSTRIKE kills on contact as the foam expands to fill the galleries, voids and holes and leaves a residual to continue protection.
Key Features:
- Insecticidal foam that can be used to treat a wide range of pests.
- Particularly useful when treating wood destroying organisms like termites, wood boring beetles and carpenter bees.
- Can be injected directly into the galleries.
- Easy-to-use can comes with an applicator hose and two tips
- Systemic insecticide that targets the pest’s central nervous system
*HomeandGardenSupply.com always recommends reading the entire product label before use, and following all necessary safety precautions, mixing instructions and proper application methods.
| Active Ingredient: | Imidicloprid - 0.05% |
| Product Documents: | |
| Target Problem: | Wood Destroying insects; termites, wood borers and beetles, and carpenter ants. |
| Area Of Use: | This product is for application to insect galleries in damaged wood, in spaces between wooden structural members or in voids within the construction. |
| Application: | Shake well before using. Hold can upright. Point away from face. Slowly press trigger to dispense foam. To minimize run-off, continue to hold the tip firmly against injection point for 5 seconds after releasing the trigger. Spot treatments with this product can be made, as a temporary control measure, in advance of the date when final treatment of the structure with soil and foundation treatments is completed. To minimize run-off, continue to hold the application tip firmly against the injection point for a full 5 seconds after releasing the dispenser trigger; this will allow product in the application hose to fully expand and enter the target area. |
| Family & Pet Safe? | This spray should not be applied into open air areas and is designed specifically for crack, crevice and spot/void treatments. Keep this chemical away from children & pets. |
| Formulation: | Professional |
| U.S. State Restrictions: | None |
| Dimensions: | 18 oz = L 2.5" x W 2.5" x L 9" Case = L 11" x W 8.5" x 10" |
| Shipping Weights: | 18 oz = 1.5 lbs Case = 17.2 lbs |
| Manufacturer: | Nisus Corporation |
| EPA Registration # | 87093-6-64405 |
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
